Suitable for lifting, pressurizing, and distributing in civil and industrial installations, distribution to autoclaves and tanks, washing systems, irrigation systems, with transfer from wells with a minimum diameter of 158 mm, tanks, and basins.

Series

SP-151/SP-152

Characteristics

Shaft: Stainless steel Aisi-431
Impeller: Cast iron EN-GJL-250 (brass for K and X) or steel FeG450
Diffuser: Cast iron EN-GJL-250 or steel FeG450
Suction support: Cast iron EN-GJL-250 or steel FeG450
Discharge port with check valve: Cast iron EN-GJL-250 or steel FeG450
Solid passage [mm]: 2
Fluid temperature [ºC]: 0-350
Max operating pressure (bar): 45
Max immersion depth [m]: 300
Rotation direction: Clockwise, viewed from the discharge port (counterclockwise for S-151-K)
Max flow rate [m3/h]: 90
Max height [m]: 456

El contador tipo MultiJET® GMM Gaer® es un contador de transmisión magnética y cabezal de registro seco. Disponibles en dos versiones, con cuerpo de latón y con cuerpo de plástico. Diseño según la norma ISO 4064 : 2005.

Series

MULTIJET

Características

– Fabricado con materiales de alta resistencia y calidad para evitar problemas de corrosión
– Cabezal de registro IP68.
– Tamaños: 1/2” hasta 2” (DN15 – DN40). En plástico hasta 1 1/2” (DN40).
– Presión máxima de trabajo: PN16 (latón) – PN10 (plástico).
– Temperatura máxima del fluido: 50ºC (latón) – 30ºC (plástico.
– Cuerpo en latón o en plástico.
– Conexión rosca BSP. Opcional NPT.
– Pérdida de carga mínima.
– Protegido contra perturbaciones producidas por campos magnéticos.
– Opcionalmente puede suministrarse con válvula de retención y con emisor de pulsos.
– El contador lleva incorporado un filtro a la entrada que permite su limpieza sin romper el sello metrológico.
– Diseño siguiendo la norma ISO 4064: 2005.
– Homologado según la Directiva 2014/32/EU de instrumentos de medida (MID), estándar EN 14154+A2:2011 y las Recomendaciones Internacionales OIML R 49 Edición 2006.
– Módulo B – Examen de tipo de modelo CE-TCM 142/18 – 5567.
– Ratio Q3/Q1 R80.

The Woltman WP type meter is a magnetic transmission meter with a dry register head, for measurement applications in drinking water networks, irrigation, and industry. Approved according to Directive 2004/22/EC on Measuring Instruments (MID), standard EN 14154+A1+A2:2005.

Series

WP

Characteristics

– Made with corrosion-resistant materials.
– Ductile iron body with epoxy coating. Other materials available on request.
– IP68 protection for the head.
– The head can rotate 360º for easy reading.
– Interchangeable measuring unit.
– Low pressure loss.
– Protected against disturbances caused by magnetic fields.
– Optionally available with dry contact pulse emitter.
– To stabilize the flow, straight sections of 10 diameters upstream and 5 diameters downstream are required (U10 D5).
– Suitable for drinking water (WRAS).

The MultiJET® GMM Gaer® meter is a magnetic transmission meter with a dry register head. Available in two versions, with brass body and with plastic body. Designed according to ISO 4064: 2005 standard.

Series

MULTIJET

Characteristics

– Made with high-strength and quality materials to avoid corrosion problems.
– IP68 register head.
– Sizes: 1/2” to 2” (DN15 – DN40). In plastic up to 1 1/2” (DN40).
– Maximum working pressure: PN16 (brass) – PN10 (plastic).
– Maximum fluid temperature: 50ºC (brass) – 30ºC (plastic).
– Body in brass or plastic.
– BSP thread connection. Optional NPT.
– Minimal pressure loss.
– Protected against disturbances caused by magnetic fields.
– Optionally available with check valve and pulse emitter.
– The meter has an integrated filter at the inlet that allows cleaning without breaking the metrological seal.
– Designed according to ISO 4064: 2005 standard.
– Approved according to Directive 2014/32/EU on measuring instruments (MID), standard EN 14154+A2:2011 and International Recommendations OIML R 49 Edition 2006.
– Module B – Type model examination CE-TCM 142/18 – 5567.
– Ratio Q3/Q1 R80.

Indirect-acting solenoid valves are designed to interact with liquid and gaseous fluids with a viscosity not exceeding 37 cst (5º E). They are characterized by their high robustness, reduced weight, and size. They are 2-way diaphragm valves, servo-operated. These solenoid valves require a minimum inlet pressure between 0.1 and 0.4 bar depending on the model to function.

Characteristics

– Plunger: Stainless steel
– Diaphragm: NBR
– Working temperature [°C]: -10/90
– Coils available in 230, 12, and 24 VAC. On demand:
– EPDM diaphragm: -10/140 °C
– FKM diaphragm: -10/150 °C

Constructed from high-quality synthetic materials, Cintropur filters are perfectly suitable for food fluids and drinking water. The filter’s propeller generates a centrifugal force in the water flow that precipitates heavy particles to the bottom of the vessel, while the fabric filters according to the chosen micron rating. TE versions can be filled with activated carbon, polyphosphates, or other granular products to eliminate unpleasant tastes or odors from the water.

Series

NW

Characteristics

– Head: Polypropylene reinforced with fiberglass.
– Vessel: Transparent and impact-resistant styrene.
– Propeller and cover: Polypropylene.
– Filter fabrics: Non-woven polyester fibers / Washable nylon.
– Service pressure [bar]: 10.
– Max working pressure [bar]: 16.
– Max fluid temperature [°C]: 50.
– Original filter fabric: 25 microns.

Pressure switch that closes or opens a contact depending on the fluid pressure reading. The fluid exerts pressure on an internal piston, causing it to move until the contacts are joined. When the pressure drops, a spring pushes the piston in the opposite direction, and the contacts separate.

Series

XMP / SSP / KP

Characteristics

– Types: Pressure group, Compressor, Manual reset, Inverted.
– Connections: 1/4″F | 1/4″ M
– Pressure range [bar]: 0-6/0-12/0-25 | 0.3-0.5 | 0.2-7.5 | 2-14
– Low adjustment range [bar]: 0.2-4.8/0.3-10.3/0.1-20.5 | Pre-set | 0.7-4
– Contacts: 1NC/2NC/3NC | 1NO | 1 Common /NO/NC.
– Max ambient temperature [°C]: -25-+70
– Protection: IP44 | IP54 | IP65

Suitable for lifting, pressurizing, and distributing in civil and industrial installations, distribution to autoclaves and cisterns, washing systems, irrigation systems, with transfer from wells with a minimum diameter of 264 mm, tanks, and basins.

Series

SP-252 / SP-253

Characteristics

Shaft: Stainless Steel Aisi-431
Impeller: Cast Iron EN-GJL-250 (S-253: G20Mn5)
Diffuser: Cast Iron EN-GJL-250 (S-253: G20Mn5)
Suction Support: Cast Iron EN-GJL-250 (S-253: G20Mn5)
Discharge Port with Check Valve: Cast Iron EN-GJL-250 (S-253: G20Mn5)
Solid Passage [mm]: 3
Fluid Temperature (ºC): 0-30º
Max. Operating Pressure (bar): 30
Max. Immersion Depth [m]: 300
Rotation Direction: Clockwise, viewed from the discharge port
Q max. [m³/h]: 400
H max. [m³/h]: 388

Advantages
– The main advantages compared to iron pipe installation are:
– The complete system is supplied (Fittings, Adapters, etc.).
– High tensile strength, reliably withstanding usual stresses.
– Suitable for drinking water.
– Lower pressure loss than conventional pipes.
– Single type for all applications, eliminating the need for special pipes.
– Easy handling for flow measurements.
– Eliminates vibrations and possible electrical derivations.
– Reduced maintenance costs.
– Long continuous lengths.
– Not affected by corrosion, even with very aggressive waters.
– Easy to transport and store.
– Not affected by the pump’s starting torque.
– Absorbs water hammer without consequences.
– Easier introduction and extraction in irregular casings.
– Easy and quick assembly and disassembly.
– Long-lasting, given the quality and nature of the materials that compose it.