If you run a company or work as a professional, you might need to consider investing in a water pump. In this post we give you all the details you may need.

But what types of companies and professionals can use water pumps? Surprisingly, a wide variety of professionals and companies need water pumps.

Examples of businesses that need water pumps:

1. Home repair and renovation

Water pumps, such as submersible pumps, can be very useful when renovating old buildings or repairing damage to more contemporary buildings. They can be used to remove water that has accumulated throughout the year, has been deposited by flooding or has simply spilled from a broken pipe.

If you invest in a water pump, you can address the challenges related to water and repair or renovation of a structure. You cannot repair or renovate a flooded building until the water has been removed, so if you are working on the repair or renovation of a home, it is always advisable to have a submersible water pump at hand.

2. Campsites and outdoor activities businesses

Do you own a campsite or do you have a business that offers outdoor activities? If so, it is very important to keep the land dry enough for customers to use it.

After heavy rain, fields, camps and other outdoor areas can become excessively muddy and almost unusable. Investing in a powerful pump that can be used to remove surface water after heavy rains is an excellent way to avoid this problem.

3. Landscaping

If you own a landscape business or work as a landscape designer, you should definitely invest in a water pump. Water pumps can be very useful if you need to irrigate large areas of land.

In addition, you can create a completely sustainable business if you decide to use solar pumping to perform these tasks, which will also be perceived by your customers as a plus.

In Aiguapres, we have more than 35 years of experience in the water pump sector. If you need a water pump for your business, do not hesitate to contact us. Our professionals will be happy to advise you and find the best solution for you.

To prolong the life of your pool’s pump engine and that it works properly, it is important to provide the proper environmental conditions around the engine. The engine itself is quite autonomous and generally needs little attention.

The correct maintenance of any type of water pump is essential for its correct operation. Take note of the following tips!

Tips for maintaining your pool pump

• Humidity: water leaks from pump seals or pipe joints must be repaired to avoid bearing and insulation failures. The pump should never get wet. Ride the engine away from low places and wet areas, and take measures to protect it from rain and wind.
• Cooling: make sure there is ample air circulation around the engine. Do not allow debris to accumulate around the engine vents. Clean the air inlets as necessary, always making sure that the power is turned off first. If an external engine cover is used, make sure it does not let moisture in and that there is enough space between the engine and the cover to allow fresh air to circulate through the engine. Clean the air inlets as necessary, making sure the power is off first.

It may be that when the engine is running it is too hot, but this does not necessarily mean that it is overloaded. Isolated Class B motors have a maximum operating temperature of 133º C. If the automatic protector does not trip and the amps do not exceed the amps, the motor does not overload.

• Seasonality: Whenever the engine shuts down for extended periods, make sure all surfaces, vents and interiors are dry to prevent oxidation. If the engine is kept outdoors, cover it to prevent debris such as leaves, dirt and snow from clogging the entrances.
  When restarting the pump and motor after a prolonged idle time, check that the suction is flooded so that the pump seal is wet. Starting the engine with the dry pump seal can damage the seal.
• Cleaning: In general, the interior of the engine should not need cleaning if the appropriate safety measures are met against contamination by dirt, lint or sand. If you want to clean the exterior, simply use a damp cloth. Do not spray the engine with a water hose. Flooding the engine can cause permanent damage.
• Lubrication: The bearings normally have double sealing and are permanently lubricated. If it seems that the bearings have failed, simply replace them. Noisy bearings are the first sign of bearing failure. If the bearings do not change immediately, the engine may overheat causing other parts to fail. Bearing noise is often a sign that the pump seal has been leaking. Always change the pump seal when changing bearings.
• Chemicals: Do not store or use chemicals near the engine. Its fumes will corrode the internal parts of the engine.
• Dirt: avoid sweeping or removing dust near the engine while it is running.

These are the main tips you should follow for the proper maintenance of your pool pump. If these tips come a little late and you have discovered that your pool pump does not work, stop by our pool pump section and we will help you find the one that best suits your needs.

Thanks to this new plant, the production of split chamber SKD pumps has been expanded. Aiguapres is an authorized partner of SAER, with the exclusive distribution of SAER in Spain. We offer our customers the best water pumps, manufactured with the best quality components.

In addition to split chamber pumps, they have pumps in stock at Cast Iron, Marine Bronze, S.S. 316 Casted, Super Duplex A-5, etc … This type of pumps, are suitable for drinking water supply, water treatment plants, aqueducts, pumping stations, etc …

To differentiate itself from others, SAER emboss the name of the Italian foundry where its Split Case pieces merge. This guarantees customers the best quality together with the real Made in Italy, unlike 95% of these pumps that are manufactured in China, India, Turkey, etc …

SAER is a manufacturer with more than 60 years in the international water pump market. It is Italy’s leader and offers its customers the highest quality through continuous research and constant development.

Aiguapres is an official SAER water pump distributor offering all its customers the best products on the market in terms of quality and innovation.

The garden water pump serves to take the water to the sprinklers or the irrigation system we use, and which is more necessary during the summer and spring; since they are usually warmer seasons and in which the plants need a greater contribution of water.

Before storing it, you must ensure that the water pump is as dry as possible. This means that it must contain the least amount of water possible, preferably none.

Take note of some tricks for maintenance and storage!

Garden water pump storage

First, it is good to store the pump in a place where it cannot be affected by frost and low temperatures. Look for a storage area where the temperature is never less than 0 degrees Celsius.

Any remaining water left in the pump could turn into ice, which expands its volume and could burst the pump components. Even the strongest pump generally cannot withstand that kind of pressure.

Protect it against the ice

Ice formation is one of the biggest enemies of water pumps. As mentioned earlier, we recommend storing the pump and suction hose and other components in a dry and frost-free place.

Of course, you should make sure that the suction and hose do not bend when you roll them. Otherwise, they can weaken at those points and cause leaks and even breakage.

People sometimes ask us if the pump should be filled with antifreeze during storage. Antifreeze should not be used. Antifreeze, and in particular the active glycol component, could damage the pump.

Start-up the following year

Before starting the pump again when necessary, you must first check the hose and pump thoroughly for possible damage.

It is also recommended to apply a new piece of Teflon tape to all connections, otherwise the pump could suck air, which would have a negative effect on its performance.

If you follow these basic maintenance tips, the pump should work in perfect condition for many years.

If you have any questions about the maintenance of your water pumps or need new parts or equipment. Do not hesitate to contact us. In Aiguapres we are experts in water pumps, with more than 35 years of experience.

Use these useful tips to observe any change in the submersible pump and schedule the appropriate services for maintenance, either by doing them yourself or leaving them in the hands of professionals.

Make regular inspections of the submersible pump

Submersible pumps often spend very large periods of time without being seen, however, there are some easy maintenance checks that can be done to ensure optimum performance and longevity.

The first thing is to monitor the pump’s output to ensure that everything works as usual. From the surface, be sure to verify that there are no water leaks, evaluate the condition of the electrical wiring and organize the valves and seals so that they are changed according to the manufacturer’s or supplier’s instructions.

It is a good idea to do some annual maintenance inspections of the pumping equipment, this will provide a record of what has been verified in each review.

Symptoms to consider in the maintenance of a submersible pump

To properly maintain a submersible pump it is necessary to be aware of some signs of failure or lower performance on a regular basis. This way the problem can be tackled before it becomes very serious.

• Less water leakage: if no water comes out it is necessary to check the circuit breaker to see if it has tripped. However, the possible causes of a decrease in the output flow may be a low level of water or liquid supply, an obstruction of sand or other materials, a restricted impeller or general wear.
• Irregular water flow: If water is sprayed on the surface, you may have a problem with cracked water pipes, or the submersible pump may have a broken check valve.
• Excessive noise: if you can hear the noise of the electric motor, stop using it and contact a specialized technician as soon as possible. If you hear the noise of the pump itself, it may be due to insufficient liquid levels (if the pump is pumping air for a part of the time), or there may be a blocked or failing component.
• Excessive heating: Overheating of a submersible water pump can sometimes indicate that there is not enough water in the well to keep it cold or that the pump is failing. If the electric motor overheats, it is important to check it to avoid more expensive repairs or replacements.
• Cloudy water or obstruction: If the liquid being pumped is unusually clogged or cloudy, there may be a problem with sediments in the system. Possible solutions may include digging a deeper well for the water pump or rinsing the pump to remove any blockage.
• Particularly high electricity bills: submersible pumps generally do not work at all times, and if this occurs, it may be a sign that the switch or pump is failing. Increased use of electricity could also indicate a system blockage or impeller failure.

If you take into account these symptoms of malfunction and perform a proper submersible pump maintenance, you can use your equipment for many years.

In addition to construction, homeowners can also be affected by large floods of sewage in cellars or basements. It is likely that in that case they will be forced to use a sewage pump to solve such a situation as quickly as possible.

Wastewater pumps are available in different types and sizes, and each pump has its own characteristics.

Are you looking for a sewage pump? In this post you will find some useful tips that you should keep in mind before making the purchase, so that it fits as much as possible to your needs.

Aspects to consider when buying a sewage pump

Permeability of suspended solids

The most important aspect of a sewage pump is its permeability to suspended solids. Suspended solids can be of different sizes and not all pumps can handle all sizes.

Larger suspended solids can cause serious damage to the pump. For example, when the pump inlet is blocked by a suspended solid, the pump runs dry and could overheat, with all the negative consequences that this entails.

Therefore, always make sure that the wastewater pump you buy can handle the largest suspended solids that will be in the wastewater you intend to drain. Our sewage pumps can process suspended solids from 10 to 50 mm in diameter. This is clearly indicated in each of the sewage pumps.

When fecal matter is processed (for example, in a manure or toilet installation), we recommend using a specific wastewater pump for this type of material; since it has very specific characteristics.

Pump capacity

That is, the maximum amount of water that a pump can process per hour. Differences in height affect the capacity of the pump. The greater the amount of water that needs to be transported, the less water leaves the pipe per hour.

Each wastewater pump includes a graph that indicates how many liters of water can be processed per hour at each height.

Each wastewater pump has a certain pumping capacity, in reference to the maximum amount of water that the pump can process per hour. Do you need to pump a lot of water in a short time? You must choose a high capacity water pump.

Pump height

The maximum height at which water can be pumped. This is equal to the pressure at which the pump processes the water. For example: 40 meters equals 4 bar.

All sewage pumps have a maximum pressure they can reach. This pressure determines the maximum height at which water can be pumped. Using a simple calculation (10 meters = 1 bar), the amount of pressure in the pump can be determined.

These are the main characteristics that must be taken into account when buying a sewage pump. If you have any questions, you can contact us. In Aiguapres we are specialists in water pumps with 35 years of experience in the sector.

We can use pressure groups for different water consumptions, such as:

Water the garden.
Increase pressure in toilets, showers or sinks.
Increase the pressure of the water flow to be able to use several appliances such as washing machines, dishwashers, coffee makers … at the same time.
Increase the flow and pressure with which the tap water comes out in the home.
Essentially, a pressure group serves us to guarantee the necessary water pressure at the desired supply point.

Different types of pressure groups

In general we can distinguish between two main groups of pressure groups, those that have a deposit and those that do not. Both groups have their advantages and disadvantages, so it is necessary to know them a little more thoroughly.

Pressure group with tank

In the pressure group with a tank, the water pump, pump water until it fills the pressure tank, which is where the water is subsequently sent to faucets, irrigation hoses or appliances.

The pump stops automatically when the tank is full and turns on when it is empty. This means that it does not always have to be in operation, so it avoids annoying noise and consumes less energy. On the contrary, it occupies more space; since we need to also install a tank.

Pressure group without tank

In the pressure group without a tank, the water pump acts directly on the pipe, so it is necessary that it is in operation at all times. Starting up every time a group is opened, the toilet tank is operated or an appliance is turned on.

This type of pressure groups occupy much less space, so they are ideal for installations where we do not have much space. However, noise and electricity consumption are higher; since it must always be on.

Why use a pressure group
It is advisable to use a pressure group when we observe that the flow of water in our installation is not sufficient for its correct operation. For

example, when the tap water pressure is very weak or our appliances take longer than normal to fill with water.

Depending on the type of problem and the type of installation, it is advisable to use one type or another of a pressure group.

Choose the appropriate pressure group

If you have doubts when choosing the most appropriate pressure group for the needs of your installation, we recommend that you let yourself be advised by a professional.

In Aiguapres we have 35 years of experience in the water pump sector and we offer you our knowledge and the best products of the leading brands in the market.

Water system engines that are used in wells, fountains and aerators are usually filled with a water-based solution.

In a deep well, you generally don’t worry about engine freezing; however, in fountains or ponds, the water pump must be protected. If you remove the pump completely, you should store the engine somewhere where it does not freeze.

Another option for winter storage of a water pump from a pond, fountain or aerator is to sink the engine to the bottom of the pond.

You should also be careful that the surface pumps do not freeze. To do this, we must drain them and condition them for the winter, to avoid that a cold wave can surprise us.

Water expands as it freezes. Without a place to handle the extra volume, the ice will inevitably break the pump or the pipe. As the cold weather approaches, do not forget to protect your groundwater system, pipes and pumping equipment from freezing.

In some cases, well pumps can often remain inactive for long enough for water to freeze. It may be necessary to provide additional heat to prevent freezing in these circumstances.

If temperatures drop a lot, you can keep a small amount of water running continuously until the temperature returns to warmer values, since running water is harder to freeze.

When it comes to a jet or centrifugal pump that you won’t use for a few months, draining the system and moving the pump to a warmer location is one of the best solutions.

To drain the pump, remove the drain plug from the top of the pump housing, or open the tap. This allows air to enter the pump body. Then, remove the drain plug at the bottom of the pump housing. This allows water to flow in and out of the pump body.

Remember, there will also be water trapped in the suction and discharge pipes. You must blow this excess water with an air compressor.

The last step is to protect the pump against water that may get stuck in the pump housing even after it has been drained. Use propylene glycol, never ethylene glycol (or RV antifreeze) as it is extremely dangerous.

Now your water pump is ready for winter!

When you start experiencing these types of problems in your home, it may be time to replace the mechanism of your water pump. Below, you will find four different water pumps that are useful for maintaining an efficient and reliable water system in your home.

1. Submersible pumps

Submersible pumps are water pumps that are installed submerged in a liquid and are designed to push the fluid to the surface and pump it to other places.

Submersible pumps can be very useful for pumping water from wells to the house, for watering the garden or for any use where water must be propelled to the surface from a lower reservoir.

In previous posts we have already talked about submersible pumps, so you can go to them to have more information about this type of water pumps for the home and its benefits.

2. Sump pumps

These types of pumps are specifically designed for basements and flood spaces. They are perfect for homes that are located in low areas and are susceptible to possible flooding.

Sump pumps remove excess water that collects in your basement or under your home.

3. Centrifugal pumps

Centrifugal pumps are mainly used in shallow wells, as they must be placed on the surface. They draw water from the well by using the suction caused by atmospheric pressure.

These types of pumps can be useful for different uses, as long as they are placed on the surface.

4. Pressurization pumps

Do you have moments of low water pressure in your home? Is it difficult to start the washing machine and the dishwasher at the same time? A pressurization pump is exceptional for these types of low water situations.

Pressurization pumps can help balance the water pressure, bringing the constant water pressure you need to your home.

If you are experiencing any of these problems in your home, do not hesitate to contact Aiguapres. We are experts in water pumps and pressure equipment. In addition, we work with the best brands, internationally renowned, to always offer the best service to our customers.

Our team of experts will advise you to find the water pump that best suits the conditions of your home, and thus solve all your pressure or supply problems.

Whether it’s because your house doesn’t have an elevated tank, the pipes don’t have the right diameter, or because you live in the upper floors of a building, not having enough water pressure is a problem that affects your everyday life.

For all these reasons, the best way to avoid these problems in the long run is to install a water pressure pump. This type of pump increases the pressure of the water that comes out of the faucet or reaches the appliances of any home.

How does a water pressure pump work?

The operation of this type of pump is very simple. It has an inlet or a pipe that sucks in the water, which is then driven by a motor to the outlet pipe. This allows the water to come out with much more pressure and speed.

What is a water pressure pump used for?

The main objective of a water pressure pump is to provide a supply network with a higher water pressure. It can be used in houses with very small pipe diameters or in multi-storey buildings, so that the water reaches the upper floors with sufficient pressure.

There are other types of pressure equipment, such as fire fighting equipment and industrial pressure equipment.

Types of water pressure pumps

The main task of a water pressure pump is to optimise water consumption in the household. We have two basic types of water pressure pumps:

1. Water pressure pump under the tank: This type of pump only works when water is flowing. This means that they are able to detect when a tap is opened or when the washing machine is taking up water. At this moment they are switched on to exert more pressure on the water so that it arrives under optimal conditions.
2. Cistern water pressure pump: This type of pump always works. Its task is to maintain the constant water pressure in a system.

If you need a pressure water pump, whether in the household or in industry, do not hesitate to contact Aiguapres. We are experts in water pumps with more than 30 years of experience in this field.