Applications
Centrifugal pumps suitable for pumping corrosive liquids. With monobloc construction, supported by the motor feet, the pump is compact and of small dimensions. Equipped with a semi-open impeller, fixed to a short stub shaft, covered with a ceramic sleeve. A blind nut locks the sleeve and impeller to the shaft. The hydraulic seal between the pump body and the ceramic sleeve is achieved by a collar. No metallic part is in contact with the liquid.
Series
CPQ
Characteristics
– Pump body: Polypropylene, PVDF on demand.
– Impeller: Polypropylene, PVDF on demand.
– Stub shaft: Stainless steel.
– Shaft sleeve: Ceramic.
– Collar and seals: Viton, EPDM on demand.
– Standard voltage: 1x230V – 50Hz | 3x230V/400V
– Max flow rate [m³/h]: 55
– Max head [m]: 34
– Max fluid temperature [ºC]: 80
– Standardized motors B-3/B-14 IP-55 at 2850 rpm.
– HONDA 5.5 HP gasoline engine at 3500 rpm (CPQ-4055G).
– Maintenance-free. Simple and economical repair.
